Turbo Expander-Compressor (Compander)
Integrated expander-compressor packages should be evaluated as one rotating system, not as two independent machines.
Expander and compressor operating cases reviewed together.
Recovered expansion energy matched to compressor-side demand.
Normal, design, startup and turndown cases considered.
Rotor dynamics, bearings, controls and package interfaces.
TIBOCN engineers turbo expander-compressor packages for cryogenic and natural-gas applications where expansion energy is recovered on a coupled compressor side. Each compander is reviewed as one rotating system, including expander duty, compressor-side power demand, shaft-speed matching, bearings, controls, process interfaces and project-specific operating cases.
Send process data for a compander technical review
What Is a Compander?
A compander combines a turbo expander and a compressor on a common shaft. The expander extracts energy while reducing gas pressure and temperature; the recovered shaft power is used by the coupled compressor instead of being dissipated. This arrangement can improve process integration in selected natural-gas, NGL-recovery and cryogenic refrigeration duties. Unlike a stand-alone industrial compressor, the compressor side is engineered as part of the expander-driven rotating package and must be specified together with the expander. The two sides cannot be treated as independent machines because a change in expander flow, pressure ratio or efficiency changes the available shaft power and therefore affects the compressor operating point. For this reason, TIBOCN evaluates the complete operating envelope, including startup, normal duty, turndown and any seasonal or feed-composition cases that can shift the power balance.
For a detailed technical explanation, see What Is a Compander? How a Turbo Expander-Compressor Works.
Typical Applications
Natural Gas Processing
Energy recovery and low-temperature separation duties where expander and compressor operating cases must be matched.
NGL Recovery
Turboexpander-based processes requiring controlled refrigeration, liquid formation and coupled power balance.
Cryogenic Refrigeration
Selected refrigeration cycles where recovered shaft power can be integrated with the process package.
Engineering Review
A compander cannot be selected reliably from flow and pressure ratio alone. TIBOCN reviews the expander and compressor sides together so the shaft-power balance and operating envelope are technically consistent. The review should also consider how both sides behave away from the design point, whether the compressor approaches surge or another operating limitation, how shaft speed changes with process conditions, and how control valves, bypasses or recycle arrangements affect the rotating package. Mechanical considerations such as rotor dynamics, bearing loading, seal arrangement, coupling of auxiliaries and instrumentation are checked together with the process requirements rather than after the aerodynamic selection is complete.
- Gas composition and phase condition
- Normal, design and turndown flow cases
- Expander inlet and outlet pressure and temperature
- Compressor-side suction and discharge conditions
- Shaft speed and power balance
- Bearing arrangement and gas-bearing requirements where applicable
- Hazardous-area and instrumentation requirements
- Flange standard, package interfaces and applicable project codes

Replacement & Retrofit Compander Projects
For existing installations, TIBOCN can review original nameplate data, GA drawings, process datasheets, performance curves, shaft arrangement, bearing configuration, interface dimensions and operating history before proposing a replacement or retrofit configuration. Interchangeability is evaluated before any drop-in assumption is made. The review may identify which interfaces can remain unchanged and which items—such as nozzle orientation, base dimensions, controls, auxiliaries, instrumentation or piping connections—need modification. If the original process duty has changed, the replacement is assessed against the current operating cases rather than simply reproducing the old machine geometry.
Inspection, Testing & Documentation
Depending on the agreed project scope, the quality plan or ITP can include material certification, dimensional inspection, impeller and rotor verification, dynamic balancing, NDT where applicable, overspeed verification, assembly and clearance records, shop testing, FAT requirements and final quality documentation. For an integrated compander, inspection planning should cover both rotating sides and the shared shaft system so that rotor condition, balance quality, bearing interfaces, critical clearances and package alignment are traceable as one machine. Where customer or EPC witness points are required, these should be defined before manufacturing so the inspection sequence and document package are clear to all parties.
Oil-Lubricated vs Active Magnetic Bearings for Turbo Expander-Compressors
For a cryogenic turbo expander or compander, the bearing arrangement affects auxiliary systems, rotor dynamics, maintenance and control integration. Oil-lubricated bearings normally require a correctly specified lubrication and monitoring system. Active magnetic bearings (AMB) require sensors, controllers, power provision and suitable backup-bearing and trip arrangements. An oil-free rotor bearing system does not automatically mean the entire plant package has no auxiliary systems.
| Selection point | Oil-lubricated bearings | Active magnetic bearings |
|---|---|---|
| Supporting systems | Oil supply, filtration, cooling and monitoring as required by design. | AMB controller, sensors, power and backup / protection arrangements. |
| Maintenance focus | Oil quality, system reliability, bearing condition and seals. | Controls, sensors, backup bearings and power continuity. |
| Retrofit implications | Confirm lubrication interfaces and rotor-bearing stability. | Assess rotor dynamics, controls, emergency landing and package interfaces. |
Neither technology is universally preferable. Selection depends on duty, speed, gases, regulations, system boundaries and verified manufacturer capability. Bearing options and any conversion must be technically confirmed for the exact project, not inferred from a generic product description.
Compander Package Procurement: Expander-Compressor Units
A turbo expander-compressor package may also be described in engineering specifications as an expander compressor unit, compressor-expander unit or compander. In gas processing and NGL recovery, the expander provides a pressure drop and refrigeration while recovered shaft power drives the coupled compressor. This is an integrated expander-compressor arrangement, not an offer for an unrelated standalone compressor.
Common procurement descriptions
- Natural gas turbo expander compressor package for NGL or LPG recovery.
- Cryogenic expander-compressor unit for process refrigeration and energy recovery.
- Compander replacement for an existing skid-mounted package, subject to process and interface verification.
- Oil-lubricated versus active-magnetic-bearing compander options, only where technically supported for the particular duty and confirmed during selection.
What should an EPC include in its compander RFQ?
Specify expander-side and compressor-side gas composition, flows and inlet / outlet pressure and temperature for each design and operating case; required refrigeration or product recovery; coupled power balance; site utilities; bearing concept; controls and protective trips; materials and applicable inspection or testing standards. A compander price or delivery estimate depends on this agreed package and supply boundary rather than the nameplate alone.
For existing equipment, see turbo expander replacement and retrofit; for a detailed data list see the technical RFQ checklist.
RFQ Data for a Compander
For a meaningful technical proposal, please provide process data for both sides of the rotating package. At minimum, include gas composition, flow cases, pressures, temperatures, required compressor duty, area classification, applicable standards, control philosophy and any existing equipment data for replacement projects.
Request a Compander Technical Proposal
Related: Turbo Expander Manufacturer · Turbo Expander Repair & Technical Services · Cryogenic Equipment Product Range
Other Shaft-Load Options
A compander uses recovered shaft power to compress gas. If your process requires refrigeration without a useful booster-compressor duty, consider an oil or fan brake. For energy recovery to an electrical load, investigate a generator-loaded turboexpander.
Oil Brake Turboexpander · Fan Brake Turboexpander · Generator-Loaded Turboexpander
